Main applications
- PET film cabinet door lamination
- PVC film furniture panel lamination
- Plywood, MDF and PVC foam board surface lamination
- Panel factory sample testing
Product description
Understanding PUR Flat Lamination Adhesive and where it fits
PUR flat lamination adhesive bonds decorative films or sheets to flat furniture panels and similar substrates. It is selected for controlled coating, initial handling strength and a final reactive bond suited to the intended panel service conditions.
Substrate porosity, surface treatment, film type, coating weight, roller temperature, line speed and stack time should be reviewed as one production system.
Production process
How it is typically produced and controlled
Reactive raw materials are metered and processed in a closed, moisture-controlled system to build the target prepolymer. The adhesive is filtered and filled into sealed packs that protect it before the laminator melts and applies it.
The line trial should check melt temperature, coating weight, wetting, nip pressure, initial bond, panel flatness, cure development and resistance after the specified conditioning time.
- Application reviewMatch substrate, decorative surface, machine, coating method, line speed, temperature, open time and final-use resistance.
- Controlled formulationMeter and process the selected resin or reactive components under the moisture, temperature and mixing controls required by the grade.
- Filtration and protected fillingFilter the adhesive and fill cartridges, pails, drums or other approved packs with the required moisture and contamination protection.
- Release and line trialReview batch tests and documents, then validate coating weight, wetting, green strength and final bond on the buyer's production line.
Adhesive performance depends on the whole system, not the product name alone. A line trial with the actual substrate and surface material is required before volume use.
Product details
Application, options and material matching
PUR flat lamination adhesive supplier China for PET film, PVC decorative film, MDF, PVC foam board, plywood and furniture panel lamination.
Available options
- Flat lamination adhesive request by film and substrate
- Application testing support
- Technical data request after process confirmation
Compatible substrates
- MDF
- PVC foam board
- Plywood
- Particle board
- Decorative film
Recommended process
Confirm film material, substrate, application process, working temperature, open time, coating amount and machine speed before selecting adhesive.
Adhesive matching
This page is for flat lamination. For profiles or edge banding, use the matching PUR adhesive page instead.
Why choose JINYOU
JINYOU helps buyers combine substrates, decorative films, adhesives, edge banding, WPC door systems and accessories into one quote-ready material package.
Specification checklist
Quote and testing data to confirm
No fake parameters are listed here. Use this checklist to request the exact TDS, sample and inspection items needed for your process.
Film materialPVC decorative film, PET high gloss film, PET super matt film or other confirmed film type.
SubstrateMDF, PVC foam board, plywood, particle board or project-specific panel.
Application processFlat lamination only. Contact JINYOU for technical data and application testing.
Working temperature / open timeContact JINYOU for technical data and application testing.
Coating amount / machine speedContact JINYOU for technical data and application testing.
Recommended testingFilm-to-board adhesion test, surface check, edge treatment check and sample approval.
Internal matching
Related JINYOU materials and solution pages
FAQ
Common buyer questions
Can JINYOU supply PUR Flat Lamination Adhesive with samples?
Yes. Buyers should send application, substrate, finish, quantity and destination details so JINYOU can recommend sample and quotation steps.
Are all technical parameters listed on this page fixed?
No. Specifications and technical data depend on the confirmed product, substrate, process and order requirement. Contact JINYOU for technical data and application testing.
Can this product be matched with other JINYOU materials?
Yes. JINYOU can help match panels, decorative films, lamination adhesives, edge banding, WPC door systems and supporting accessories by project.
Product detail
PUR flat lamination adhesive for films and furniture panels
Product definition and buying guidance. Adhesive selection is application-specific. The same grade should not be assumed suitable for every film, board, machine, line speed or climate.
PUR flat lamination adhesive for films and furniture panels is presented as a distinct purchasing family rather than a generic category label.
Adhesive selection is application-specific. The same grade should not be assumed suitable for every film, board, machine, line speed or climate.
Send substrate and film types, machine and glue system, line speed, temperatures, coating weight, workshop conditions and required bond performance.
JINYOU will map the request to the suitable current product, owned-production or partner-manufacturing source as applicable, then confirm samples, documents and commercial terms before order.
Product familyPUR flat lamination adhesive for films and furniture panels
Primary selection basisAdhesive selection is application-specific. The same grade should not be assumed suitable for every film, board, machine, line speed or climate.
Buyer inputSend substrate and film types, machine and glue system, line speed, temperatures, coating weight, workshop conditions and required bond performance.
Confirmation ruleFinal specifications, production source, availability, compliance evidence and commercial terms require written confirmation.
Typical production and supply-control workflow
Step 1Application mappingRecord substrate, surface energy, film or edge material, machine, speed and environmental conditions.
Step 2Grade and sample selectionSelect a current grade using the latest TDS/SDS and a controlled trial quantity.
Step 3Production and packingCoordinate formulation, reaction or blending, filtration and moisture-protected packing for the confirmed grade.
Step 4Line validationCheck coating, open time, initial tack, appearance, heat or moisture performance on the buyer's actual line.
This is a typical process and supply-control sequence, not a claim that every product is made on one JINYOU-owned line. Exact procedures and evidence depend on the confirmed factory, grade and order.
RFQ information to send
- Exact product or grade and end-use
- Dimensions, thickness, color, finish or formulation role
- Machine, process and operating conditions
- Target performance and approval sample
- Required TDS, SDS, COA or destination evidence
- Quantity, packing, labeling and destination
- Incoterm, target schedule and trial request
- Photos, drawings or current reference sample